Residential · Hollywood, FL
Upgrade curb appeal with stamped concrete that looks like pavers, slate, or wood, without the shifting and weeds. Quality Concrete Hollywood has served Hollywood since 2019, pouring stamped concrete patios and driveways built for South Florida heat, rain, and daily traffic.
Great stamped concrete starts under the slab. We excavate to proper depth, proof-roll soft spots, and build a compacted base with clean limerock or FDOT-grade road base in 4-6 inch lifts using a plate compactor. Forms are set true and square, edges are reinforced, and control joints are planned to manage shrinkage cracking. For driveways and high-load areas, we install steel reinforcement (rebar or welded wire mesh on chairs) and verify thickness, typically 4 inches for patios and 5-6 inches for driveways and approaches when needed.
South Florida conditions demand the right mix and the right finish timing. We use ready-mix concrete specified for exterior flatwork, commonly 3,500-4,000 PSI with air-free finishing appropriate for our climate, plus fiber mesh when it benefits crack control. Stamp work is done with integral color or a dry-shake color hardener, then patterned with professional urethane stamp mats, textured skins, and a release agent for clean detail. You can choose a broom-finish border, tooled joints, and a slope that drains correctly to avoid ponding, with sealer options (acrylic or polyurethane) selected for UV, pool-deck splash, and tire traffic.
Hollywood customers choose us because we treat stamped concrete like a system, not a quick surface. You get clear layout planning for patterns like ashlar slate, cobblestone, or brick, with realistic joint lines that fit the slab size and control-joint plan. We show samples, confirm color choices in writing, and explain what to expect as concrete cures, including natural mottling and minor hairline cracking. Our crews use the right tools for consistent results, including bull floats, magnesium hand floats, edging tools, saw-cut equipment, and high-quality stamps, and we keep the jobsite clean and safe from prep through sealing.
Before we leave, we walk the project with you and check the details that matter: straight edges, clean borders, uniform texture, proper drainage, and sealed coverage where specified. You receive curing and care instructions, including when to allow foot traffic, vehicle traffic, and when to reseal for best color retention. We also provide a written estimate up front, a clear scope of work, and documentation that we are licensed and insured. The result is a stamped concrete patio or driveway that looks finished, performs like concrete, and is easy to maintain year after year.
Yes. We provide a free written estimate after reviewing the site conditions, access, elevations, and scope.
Yes. Quality Concrete Hollywood is licensed and insured for concrete contracting work.
Yes. We can sawcut, break, remove, and haul off existing concrete, then rebuild the base, forms, and reinforcement before the new pour.
In many cases, yes. We can match common finishes like broom-finish and light salt-finish, and we plan joint layout and edges to blend with adjacent flatwork.
Pricing depends on square footage, thickness, reinforcement, base work, demolition/haul-off, access, drainage corrections, and finish and sealing requirements. A site visit helps us give an accurate written number.
Stamped concrete is one of the best ways to get a high-end look with the strength of a monolithic slab. Instead of installing individual pavers that can settle and grow weeds, we pour a reinforced concrete slab, add color, and imprint a patterned texture that mimics brick, stone, slate, or wood planks. Quality Concrete Hollywood installs stamped concrete patios and driveways designed for South Florida weather, with correct base prep, drainage, jointing, and sealing.
A stamped concrete project has three make-or-break points: the base, the pour, and the finish window. We compact the subgrade and base, set forms, and place reinforcement so the slab stays stable. During the pour we strike off, bull-float, edge, and time the stamp set so the pattern is crisp without tearing. Control joints are laid out to manage shrinkage and keep cracking predictable, then saw-cut where appropriate after the concrete gains strength.
For patios, we often add decorative borders, seamless texture skins, and custom joint layouts that fit furniture areas and walk paths. For driveways, we focus on thickness, reinforcement, and a finish system that stands up to turning tires, heat, and rain. Color can be integral (mixed throughout) or surface-applied with color hardener for stronger, more uniform tone, and we use release agents to bring out contrast and keep stamps from sticking.
Sealing is the final performance step. A quality exterior sealer helps protect color, reduces water absorption, and makes routine cleaning easier. We explain drying times, curing, and safe return-to-service schedules, plus maintenance like periodic resealing and avoiding harsh degreasers. If you want stamped concrete that looks sharp on day one and still looks good years later, we will provide a free written estimate and a straightforward plan for your patio or driveway.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Hollywood. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
