Commercial · Hollywood, FL
A concrete parking lot has to carry daily traffic, resist oil and water, and drain correctly from day one. Quality Concrete Hollywood builds and replaces concrete parking lots in Hollywood with tight layout control, durable mixes, and clean striping-ready finishes.
Prep starts with layout and proof of grades so parking, drive aisles, and ADA routes land where they should. We sawcut and remove failed concrete, excavate soft spots, and build a stable section using compacted limerock base (typically 6-8 inches) and geotextile fabric where needed to separate weak subgrade. Compaction is verified with lifts, then forms are set, elevations are checked with a laser level, and dowels are drilled and epoxy-set at tie-ins to existing slabs. Before any pour, we confirm utility covers, drainage structures, and joint locations so the slab works as one system.
South Florida heat and rain demand a mix and finish that will not scale, dust, or trap water. We place concrete at appropriate slump, consolidate edges and around drains, then strike off and bull-float for a flat surface that still holds pitch to catch basins. Most parking areas get a broom-finish for traction, with troweled bands only where specified. Control joints are sawcut on schedule to reduce random cracking, and we install expansion joints at buildings, light pole bases, and other fixed restraints. Curing is handled with a curing compound or wet cure plan based on conditions, because cure quality is what drives strength and surface durability.
Hollywood property managers and business owners choose us because we run the project like a site contractor, not just a pour crew. You get clear phasing to keep access open, protection of landscaping and curbs, and a plan for deliveries, pump placement, and safe pedestrian routing. We use commercial-grade forming, rebar or welded wire reinforcement per design, and we pay attention to details that affect long-term performance, like thickened edges, consistent joint spacing, and proper tie-ins at approaches. As a licensed and insured contractor serving since 2019, we keep communication tight and documentation simple, so you know what is being built and why.
At closeout, we walk the slab with you to confirm slopes, joint layout, edges, and transitions at sidewalks and entrances. You receive a written scope, reinforcement and thickness notes (common sections range 5-8 inches depending on loads), and care instructions that cover cure time, sawcut timing, and when to open to traffic. If your project includes wheel stops, bollards, signage bases, or striping coordination, we confirm anchor locations and leave clean surfaces ready for paint. The result is a concrete parking lot built for predictable drainage, safer traction, and fewer repairs over the service life.
Yes. We provide a free written estimate after reviewing the site conditions, access, elevations, and scope.
Yes. Quality Concrete Hollywood is licensed and insured for concrete contracting work.
Yes. We can sawcut, break, remove, and haul off existing concrete, then rebuild the base, forms, and reinforcement before the new pour.
In many cases, yes. We can match common finishes like broom-finish and light salt-finish, and we plan joint layout and edges to blend with adjacent flatwork.
Pricing depends on square footage, thickness, reinforcement, base work, demolition/haul-off, access, drainage corrections, and finish and sealing requirements. A site visit helps us give an accurate written number.
If your lot is breaking apart, ponding after storms, or constantly being patched, replacing it with a properly built concrete parking lot is often the most cost-effective long-term fix. Quality Concrete Hollywood installs new parking lots and reconstructs failed slabs for retail, offices, multifamily, warehouses, and mixed-use properties. We start by verifying traffic needs and subgrade conditions, then build the section with the right base, reinforcement, joints, and finish so the pavement performs under turning tires, delivery vehicles, and Florida weather.
A durable concrete parking lot depends on what is under the slab as much as the concrete itself. We remove unsuitable material, rebuild the base in compacted lifts, and use geotextile separation when soils are weak or pumping. Forms are set to elevation, edges are supported, and tie-ins are doweled so new work does not rock or fault against existing pavements. Where the design calls for it, we install thickened edges and isolated pads for dumpsters, loading zones, or heavy turning areas.
During placement, we control slump and finishing so the surface stays dense and drains correctly. After strikeoff and floating, we texture with a broom-finish for grip, then sawcut joints on schedule to reduce random cracking. Expansion joints are placed at buildings and fixed obstructions so slab movement does not push or spall edges. Curing is treated as part of the build, because proper curing improves strength gain and surface wear.
From your first call to final walkthrough, you get a free written estimate, clear scope, and jobsite coordination that respects business hours. We review access and staging, confirm ADA transitions and slopes, and leave the slab ready for striping and signage installation. If you need a concrete parking lot built to handle real traffic without constant patchwork, we can plan the work, phase it, and deliver a clean, long-lasting result.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Hollywood. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
